How To Clean Tile Floors With Vinegar And Baking Soda?

As polished of a look as ceramic or porcelain is capable of delivering, how to clean tile floors with baking soda and vinegar is always such a hassle to tackle, especially in high traffic areas.

All those specs of dirt inside the crevice, all the stain, mildew, and grout prints on the once sleek surface are such a sore to the eyes aesthetically.

To scrub the bacteria away, you must have gone through some extravagant lengths such as buying cleaning robots or replacing your mop. Yet if they did work, you needn’t be here reading this tutorial frustratingly. So is there a more economical way to flatter the spotless beauty of tile floors on a daily basis?

To remove stains, a small acidic drop of vinegar has always been the best child that housewives’ trivial wisdom ever conceived. From small armpits and grass stains to red wine and cat urine, vinegar has successfully cast its magic touch on various kinds of icky buildups, especially with the help of baking soda.

If vinegar and baking soda end up being adopted, one small concern would be likely to arise, is vinegar harmful to tile floors? And if it isn’t, how to clean tile floors with vinegar and baking soda in the most scientifically approved approach?

Let’s unwrap these problems one by one, and give it a whirl in this step by step guide with us right now!

Tip For you >> How To Remove Stains From Floor Tiles

How To Clean Tile Floors With Vinegar And Baking Soda

There are flexible ways of treating different kinds of stains from top soiled spots to darkened mortars, and the skewness can be delivered subtly merely via juggling between the concentration level of white vinegar.

The general floor cleaning process by means of vinegar and baking soda

What you’ll need to clean tile floors other than vinegar and baking soda comprise:

➤ ½ cup of water
➤ ½ cup of dish-washing detergent
➤ A clean grout brush, toothbrush or soft bristle scrub brush
➤ A spin mop/rag
➤ A water bucket
➤ A spray bottle to house the mixture
➤ A pair of gloves for extra safety and sanity
➤ ½ to 1 cup of distilled white vinegar/ high-potent apple cider vinegar
➤ 1 ⅔ cup of baking soda

With a whopping eight items above, it’s time to cut to the chase and bring the most effective cleaning solution between baking soda and vinegar to life. Below are the steps to create the right proportional mixture:

Step 1: Stir the solution including lukewarm water and dish-washing detergent, vinegar, and baking soda. Let it sit for a minute to completely dissolve.

Step 2: Divide the well-mixed solution between the sprayer and the bucket. Give the tile floor a quick swirl of broom pre-spraying to eliminate alien particles.

Step 3: Dip the spin mop into the bucket. Wipe the floor carefully in clockwise patterns and check if the vinegar treatment makes it to each corner.

With indelible stains, put on your gloves, pick up the scrub and patiently scour the spots drenched in spraying solution.

Step 4: Now that the tile floor becomes spotless once again, deodorize it with fresh water. To continue the process, pour the vinegar solution inside the bucket away and clean the spin mop. Afterward, refill the bucket with warm water and perform the same mopping patterns on the entire floor.

Don’t forget to rinse the vinegar coated tile floor with clean water if you don’t want sticky flakes of baking soda to reside on the surface.

Cleaning tips on how to eliminate stubborn stains

At no time can you combat persistent spots formed by bacteria and resilient materials such as mildew, ink, nail polish, or bubble gum with merely clean water.

Conventionally, on tile flooring, people remove stiff stains with corrosive solutions such as 3% hydrogen peroxide concentration, bleach, borax, or scouring powder.

But what if, we tell you, all those harmful chemicals can be replaced simply by employing your cooking vinegar merely?

Are you willing to give this time-saving and cost-effective DIY cleaning treatment a chance?

Ultimately, ordinary distilled white vinegar wouldn’t do the job. If you want those permanent marks to perish once and for all, you’d need to pack full-strength vinegar and scrub the spots passionately.

Remember, this potent solution can likely corrode tile floors, in particular, hardwood surfaces. Hence, pay full focus on the time-lapse you’re planning to leave the vinegar on and rinse the floor again with fresh water to preserve a full powerhouse with both spotless and long-lasting beauty.

Cleaning tips on how to get rid of darkened mortars

Considering ceaseless rants about DIY cooking vinegar dilution up to present, in comparison, baking soda seems to fall short. Don’t worry, however, because while the powder may not be the most ideal to maintain a sleek surface, it excels beyond expectation in freshening the dirt-filled crevices.

In commence, you’d have to make a baking soda-water paste. Then pick up a toothbrush to paint the paste along the grout.

Next, dilute vinegar into water in equal parts, 50:50 ratio. Pour the mixture in the sprayer and release a drizzle over the paste, allow the foam to form afterward. With some of more hard-core stains, you’d have to leave the mixture on them overnight for more profound absorption.

Finally, use the toothbrush and gently scrub along the sprout lines. Also, do not conclude the day without rinsing the mixture once more to eliminate that distinctive pungent odor of the acidic vinegar and all the powder streaks of baking soda.

Is vinegar harmful to tile floors?

Undoubtedly, not every kind of tile flooring can resist some potent acidic substances inside vinegar.

Some outstanding members of these tiles can be named such as marble, limestone, or hardwood flooring.

Bottom Line

All in all, whether on tile floors or vinyl floors, no one would turn down a safe and clean living environment. With regard to tile floors, in particular, household owners would have to bear double threats from surface stains and darkened grouts.

Conventionally, people must spend a considerable sum on corrosive chemical solutions and detergents such as bleach or concentrates. In the long run, however, you cannot spray toxins every single day around the air you breathe. Hence, some safe and cost-effective substitutes like baking soda and vinegar are the new sustainable cleaning trends.

If you’re wondering how to clean tile floors with vinegar and baking soda eventually, just follow these simple steps below: